Dear All,

I have windows server 2008 standard 32 bit. I want to use 64 bit architecture. Can i restore 32 bit windows image backup on 64 bit architecture windows server?

How to upgrade 32 bit to 64 bit with existing data?

On this server SQL server 2008 R2 and some usefull application.

Many thanks.

On one of my AD 2008 domain controllers the NTDS writer is in failed state.

Writer name: 'NTDS'
   Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
   Writer Instance Id: {a0b40cc8-ded5-4497-b6dd-50f56de2dbe2}
   State: [11] Failed
   Last error: Non-retryable error

This is Windows server 2008 STD 64 bit

I'm trying to find out if there is a way to fix this WITHOUT rebooting my DC.  I tried restarting the VSS service.

The cause of the failure was this.

lsass (636) An attempt to write to the file "\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy9\Windows\NTDS\edb.log" at offset 6029824 (0x00000000005c0200) for 512 (0x00000200) bytes failed after 0 seconds with system error 19 (0x00000013): "The media is write protected. ".  The write operation will fail with error -1032 (0xfffffbf8).  If this error persists then the file may be damaged and may need to be restored from a previous backup.

lsass (636) Unable to write to logfile \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy9\Windows\NTDS\edb.log. Error -1032 (0xfffffbf8).

Any help is greatly appreciated!

I've got Windows Server Backup on Server 2012 R2, and it's run flawlessly for years.

Last week I copied a folder from another computer to the server, and modified permissions on it so that only 2 users had access to it (a user, and the Administrator).

When I tried a test recovery from the nightly backup (Windows Server Backup), I suddenly cannot browse ANY previous day's backup, even prior to the new folder existing.  When I expand the server name, I now just get:

"Unable to browse System Reserved. Access is denied" and
"Unable to browse Local disk (C:). Access is denied

These errors only showed up after adding the user folder last week, and modifying its permissions.

Once I saw that error, I went back to the permissions on the new folder and added the user "SYSTEM", with full permissions.  But it has made no difference.

Has anyone ever seen this before?

Thanks

Dave

David Ewer

hi,

when i was taking system state backup on first time, the server is taking the backup without any problems. but if i start the system state backup again, the server will take only incremental backup not full. so the no of available backup is only one. multiple backup is not available. my server OS is Windows server 2008 R2

please help me

Hi, I am looking for a suitable tool for Active directory backup and recovery for my organization .

Currently we are using Quest recovery manager tool for AD Backup & recovery.

We've found some alternatives like ;

• ManageEngine's Recovery Manager Plus
• Veeam Backup and Replication

Please suggest which one is most relevant for the production environment and comparatively close to quest recovery manager.

Hello Friends,

I am facing Windows Image backup failed with following error "The backup operation that started at '‎2016‎-‎09‎-‎29T15:30:19.165612500Z' has failed with following error code '0x8078014D' (There was a failure in updating the backup for deleted items.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved".

Windows Server version - 2012R2 Standard.

Log Name:      Microsoft-Windows-BackupSource:        Microsoft-Windows-BackupDate:          9/29/2016 9:07:27 PMEvent ID:      5Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEM Computer:      XXXXXXXXXXDescription:The backup operation that started at '‎2016‎-‎09‎-‎29T15:30:19.165612500Z' has failed with following error code '0x8078014D' (There was a failure in updating the backup for deleted items.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />    <EventID>5</EventID>    <Version>3</Version>    <Level>2</Level>    <Task>0</Task>    <Opcode>0</Opcode>    <Keywords>0x4000000000000000</Keywords>    <TimeCreated SystemTime="2016-09-29T15:37:27.619425900Z" />    <EventRecordID>1863</EventRecordID>    <Correlation />    <Execution ProcessID="156" ThreadID="4400" />    <Channel>Microsoft-Windows-Backup</Channel>    <Computer>XXXXXXXXX</Computer>    <Security UserID="S-1XXX" />  </System>  <EventData>    <Data Name="BackupTemplateID">{2BB1F66E-7E8B-42DC-9396-0824F430D4FC}</Data>    <Data Name="HRESULT">0x8078014d</Data>    <Data Name="DetailedHRESULT">0x8078004f</Data>    <Data Name="ErrorMessage">%%2155348301</Data>    <Data Name="BackupState">12</Data>    <Data Name="BackupTime">2016-09-29T15:30:19.165612500Z</Data>    <Data Name="BackupTarget">\\DC-JKT\Backup-JKT\DC-JKT</Data>    <Data Name="NumOfVolumes">1</Data>    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="7" HResult="-2139618995" DetailedHResult="0" PreviousState="15" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="0" HasSystemState="1" IsCompacted="0" IsPruned="1" IsRecreateVhd="0" FullBackupReason="4" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1572" BackupTypeDetermined="1" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>    <Data Name="SourceSnapStartTime">2016-09-29T15:30:19.134336600Z</Data>    <Data Name="SourceSnapEndTime">2016-09-29T15:31:30.095919100Z</Data>    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>    <Data Name="BackupPreviousState">16</Data>    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="1" HResult="-2139618995" DetailedHResult="-2139619249" /&gt;</Data>    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>    <Data Name="VssFullBackup">false</Data>    <Data Name="UserInputBMR">false</Data>    <Data Name="UserInputSSB">true</Data>    <Data Name="BackupSuccessLogPath">C:\Windows\Logs\WindowsServerBackup\Backup-29-09-2016_15-30-19.log</Data>    <Data Name="BackupFailureLogPath">C:\Windows\Logs\WindowsServerBackup\Backup_Error-29-09-2016_15-30-19.log</Data>    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>    <Data Name="BackupFlags">0x9</Data>    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>  </EventData></Event>

Thanks in Advance

Hello,

Our physical Windows 2016 servers are making backups with Windows Server Backup to an iScsi connected disk.
This way we can store our backups on another location and have the benefits of incremental backups, which would not have worked over an regular network share.

During a disaster recovery we would then connect the iScsi disk to another server. 
On the server we use "VSSADMIN LIST SHADOWS" to find the shadowcopy of the date that we want to go back to.
Then using "MKLINK /d <symbolic-link> <target>" we make that shadowcopy available for usage. Within the file explorer you can see the link and also view de WSB data, with the modified date of that specific point in time.
On this symbolic link we create a share so the system that needs te be restored can be pointed to get the WSB data from there.

This works and all is fine.. So far so good.. but now the problem we encountered.

That was in de WSB data from a point in time perspective.
One DR test worked without any problems and we could restore the system by using a shadowcopy from let's say two days back in time.

On another server we used the exact same procedure but the restore of two days back in time failed and gave the error:
"System image restore fialed: The mounted backup volume is inaccessible. Please retry the operation (0x8078004F)"

By trial and error I found out that the first WSB data back in time that was usable was from 40 days ago. All other shadowcopies untill the one that was made last night failed and could not be used.

Now we have some questions which we haven't found an answer to so far..

Q: Most important.. Is there any way that we can perform a health check of WSB data from our other servers that we haven't checked yet?

Q: Does anyone have a possible answer to why all WSB data after a date is not useable anymore. Personally I have a gut feeling that is has something to do with all being differentials.

Q: Can we limit the number of days of unuseable data by forcing a full backup once a week and the other days differential.

I am trying to do a Bare Metal Restore of a HP single Xeon processor system to a Hyper V virtual machine.  The restore goes fine until the virtual machine reboots.  After rebooting it gets a stop error with code 0x0000007B which means INACCESSABLE_BOOT_DEVICE.  The HP system has a single 140GB SCSI drive with no RAID.  The virtual hard drive is 140GB and after the restore it has 2 partitions.  The system partition and the boot partition just like the physical HP server.

Is it possible to restore a backup to a Hyper V virtual machine?
Any ideas why I would get a stop error after rebooting?

I am guessing it is a hard disk controller driver from the HP that is causing the problem.

Thanks for any help

Hello,

I have two servers, both with Windows 2019 STD + SQL Server 2017 STD installed.

The hosted MS SQL Databases are being replicated using Basic Always on Availability Groups, while testing Windows Server Backup (full server backup) on the primary and secondary SQL Server, I've found out that the backup completes successfully on the primary server, but on the replica server the backup finishes with errors.

Before jumping to conclusions, during the testing period I used SQL Server 2017 Evaluation (feature level equivalent to SQL Server 2017 Enterprise), with the same configuration, and on both primary and secondary servers, Windows Server Backup finishes without issues.

The reason it doesn't work on the Standard version of SQL Server 2017 is because the secondary replica cannot be set to readable during the backup process, and so the backup finishes with errors.

The error as shown in the Event Viewer:

Log Name:      Application
Source:        SQLWRITER
Date:          9/10/2019 12:52:52 AM
Event ID:      24583
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SERVERNAME
Description:
Sqllib error: OLEDB Error encountered calling ICommandText::Execute. hr = 0x80040e14. SQLSTATE: 42000, Native Error: 3013
Error state: 1, Severity: 16
Source: Microsoft SQL Server Native Client 11.0
Error message: BACKUP DATABASE is terminating abnormally.
SQLSTATE: 42000, Native Error: 976
Error state: 1, Severity: 14
Source: Microsoft SQL Server Native Client 11.0
Error message: The target database, 'WideWorldImporters', is participating in an availability group and is currently not accessible for queries. Either data movement is suspended or the availability replica is not enabled for read access. To allow read-only access to this and other databases in the availability group, enable read access to one or more secondary availability replicas in the group.  For more information, see the ALTER AVAILABILITY GROUP statement in SQL Server Books Online.

Is there any way to do a full server backup on the secondary replica server? I mean other than doing a fail over, backup and then fail back to primary.

Thank you!

Nome do registo:Application
Origem:        Microsoft-Windows-Backup
Data:          10/09/2019 12:51:43
ID do evento:  517
Categoria de Tarefa:Nenhum
Nível:         Erro
Palavras-chave:
Utilizador:    SYSTEM
Computador:   (XXXXXXXXXXXXXXXXXXXX) 
Descrição:
A operação de cópia de segurança iniciada em '‎2019‎-‎09‎-‎10T15:10:11.095744600Z' falhou com o seguinte código de erro '0x80780102' (O escritor de sistema não foi localizado na cópia de segurança.). Consulte os detalhes do evento para obter uma solução e, em seguida, execute novamente a operação de cópia de segurança após o problema estar resolvido.
Evento Xml:
<Evento xmlns = "http://schemas.microsoft.com / win / 2004/08 / events / event">
  <Sistema>
    <Nome do provedor = "Microsoft-Windows-Backup" Guid = "{1DB28F2E-8F80-4027 -8C5A-A11F7F10F62D} "/>
    <EventID> 517 </EventID>
    <versão> 1 </Version>
    <Level> 2 </Level>
    <Task> 0 </Task>
    <Opcode> 0 </Opcode>
    <Palavras-chave > 0x8000000000000000 </Keywords>
    <TimeCreated SystemTime = "2019-09-10T15: 51: 43.921609000Z" />
    <EventRecordID> 846932 </EventRecordID>
    <Correlação />
    <Execution ProcessID = "17204"ThreadID = "10520" />
    <Channel> Aplicativo </Channel>
<Computer> (XXXXXXXXXXXXXXXXXXXX) </ Computador>
    <Security UserID = "S-1-5-18" />
  </System>
  <EventData>
    <Data Name = "BackupTime"> 2019-09-10T15: 10: 11.095744600Z </Data>
    <Data Name = "ErrorCode "> 0x80780102 </Data>
    <Data Name =" ErrorMessage "> %% 2155348226 </Data>
  </EventData>
</Event> 

Hi,

I have installed MS Azure Recovery Service Agent on a W2K8 R2 SP1. I'm trying to schedule the first offline backup. I receive the error "Unable to locate Azure Powershell on this server". All the prerequisites are met, IE11, MARS Agent 2.0.9169, Powershell 5.1, .Net 4.7.2, Powershell Azure module installed.

Do you have an idea?

Hi,

We have configured windows server backup scheduled backup option.

we are able to run the backup manually, but the scheduled job is failing.

After checking further, the scheduled task is failing to launch.

The following is the event:

Task Scheduler failed to start "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" task for user "XXXXXXXXX".

Additional Data: Error Value: 2147943726.

please advise.

Thanks in advance

Ekachakra

I am trying to use WSB to backup my Hyper-V VM's from a Server 2016 system.  Actually this is happening on two identical servers. 

When trying to backup a VM, it completes the Host component but fails on the actual VM.  It fails immediately with the following error(s).  The ETL file I have opened using Windows Performance Analyzer but I have not idea what the content means.  Can someone please look at this and point me in the right direction?  This is not new technology.  It was available in Server 2012r2.  It should not be this difficult.   Thanks already

Details:

Event ID:  1001

Fault bucket , type 0

Event Name: Windows Server Backup Error

Response: Not available

Cab Id: 0

Problem signature:

P1: 2

P2: 1

P3: 0x00000000

P4: 0x00000000

P5: 0x00000000

P6: 0x00000000

P7: 0x00000000

P8: 0x8100010f

P9:

P10:

Attached files:

\\?\C:\Windows\Logs\WindowsServerBackup\WBEngine.0.etl

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER28B2.tmp.WERInternalMetadata.xml

These files may be available here:

C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_2_7ba82da1c416ce745c85c91194d9cc184b6e2abf_00000000_cab_2e7e2a58

Analysis symbol:

Rechecking for solution: 0

Report Id: dd92e97e-d89c-11e9-842b-1866dab7c9fd

Report Status: 100

Hashed bucket:

 
Some of the attached files reference above are either not present or I am not sure how to use them.

Below is the contents of the log file in the C:\Windows\Logs\WindowsServerBackup folder 

Writer Failures
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Instance Id: {D2616CFA-F481-48A9-9E91-BCBAF048E5F6}
Writer Name: Microsoft Hyper-V VSS Writer
Writer State: 0
Failure Result: 81000112
Application Result: 0
Application Message: (null)   
  Component: 72D8F630-F1C7-4520-A32F-1437E7697280   
  Logical Path:   
  Component Result: 8100010F   
  Component Message: Component reports path on volume which has been excluded. (0x8100010F)

*-----------------------------*
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}   
  Component: 72D8F630-F1C7-4520-A32F-1437E7697280   
  Caption     : Online\Poly-DC1   
  Logical Path:   
  Error          : 80780175   
  Error Message   : Component was skipped from volume shadow copy.
  Detailed Error  : 8100010F   
  Detailed Error Message : Component reports path on volume which has been excluded.
*-----------------------------*