Hi,
Please could some help me. I'm wanting to start again backing up to x3 external drives using Wbadmin. But when i try and create a new backup its just stuck on please wait. Any ideas how i can kill all the old jobs off and just start fresh? This is Server 2016 Standard.
Cheers
Mick
Mikehawo
We've been running out of space on our CSVs. I determined that the hidden System Volume Information directory is huge. It is huge because of large VSS files in the directory.
Path to CSVshi all,
I just wanted to do a restore/Recover from a Virtual machine (inside Riverbed/Steelhead), which is Windows Server 2008R2.
So i just done a full backup, and want to restore/recover (with Recovery Wizard) a volume (D:\) that has most of the user's data to a Network Drive (NAS) that has been mapped in Y: (so i want all users access the NAS temporarily as i want to upgrade the VM
OS to Winserver 2012), but when i want to recover it this error popped up : "Cannot Find File Specified" so the recovery cannot start
been searching back and forth, still no luck for a solution.
Kindly help.
Thanks before.
Hi buddies.
Maybe you know how to solve this problem I'm getting. I have a backup policy in my server, that makes a full image. I'm able to restore that image (using the windows cd) if it's located in an USB HDD, but if I try to load the image trough a network share, the quoted error message appears...
Any idea? I've tried in different servers, locations, sharing permisions...
Thx!
Hello,
When I run Windows Server Backup or any backup software that uses Microsoft VSS my domain controllers crash. I get the following events when this happens. Server patches are up to date and I ran:
Sfc /scannowDism /online /cleanup-image /restorehealth
these above commands did not fix the issue
Event 1000 Application Error
Faulting application name: lsass.exe, version: 6.3.9600.17415, time stamp: 0x545042fe
Faulting module name: ntdll.dll, version: 6.3.9600.19629, time stamp: 0x5e2fdc0d
Exception code: 0xc0000374
Fault offset: 0x00000000000f1cd0
Faulting process id: 0x228
Faulting application start time: 0x01d5ece223b6248e
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ffffc66b-58d6-11ea-80f7-00505697519c
Faulting package full name:
Faulting package-relative application ID:
Event 1015 Wininit:
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000374. The machine must now be restarted.
This happens with Commvault backup Idata agent but also if I use the native Windows Server Backup with the Commvault completely uninstalled?
Hi Team,
We were using 2 node SQL Sever and DB backup taking through Commvault application.
One specific node will be active state DB backup getting failed and below mentioned error message getting in Commvault, But other node will be active state DB backup happening without any issue.
Set pending cause [Unable to get the SQL Version for the server [ABCSOMSQL001]. Possible causes: 1. SQL Services are not running. 2. If SQL Server instance is clustered, it may have failed over.]::Client [abcsdsdpvw002] Application [SQLiDA] Message Id [503316812] RCID [0] ReservationId [0]. Level [0] flags [0] id [0] overwrite [0] append [0] CustId[0].
Please let me know how to fix this issue.
Regards,
Vibin Raj N
After the Windows 10 version 1803 upgrade on April 30, 2018, my System Image Backup keeps failing withe two messages. "The backup failed" "The RPC server is unavailable (0x800706BA)".
Note that the System Image Backup worked before the upgrade. The upgrade completed OK and I have not found any other issues.
I checked that =1= The RPC (Remote Procedure Call) service in Services is active and running and =2= the DCOM (Distributed COM) is enabled. There used to be a SYSTEM disk when I did the defrag, the defrag does not show the SYSTEM disk in version 1803.
Is it a bug, or is there a fix or should I try the Image Recovery (that might fail as well).
Attempted to do backup 2nd server data section and then recovery.
In Windows Server Backup selected: Backup Once, Different Options, Custom, Add items, select Bare metal recovery, Ok, Next, Remote shared folder, Server., \\server1\folder (left default Inherit), Next
The backup was listed as completely successfully.
I tried to restore by booting from Windows Server 2019 disk. Selected Next to Windows Server 2019 window. repair your computer, Troubleshoot, System Image Recovery, Windows Server. But the only backup is one done to bare metal recovery USB drive earlier and no sign of the backup just done.
Tried Select a system image. Again only earlier backup is seen.
Tried Advanced..., Search for a system image on the network, Yes to Are you sure you want to connect to the network, Entered the \\server1\folder
Then I am getting enter credentials.
Does not look like a place to enter credentials. The script has passed by User Name: and Password.
Closing the windows gets remote procedure call failed. 0x800706BE
Hello,
My company is using windows server 2016 and now find a method to backup one of the driver 120TB (80TB used), one consider is to use windows server backup ? I want to backup it weekly or daily.
Hi
SBS 2011.
Using Windows backup, when I try to restore some files I get below error on all drives.
Unable to browse XXXXX. The shadow copy of the backup stored on the backup destination cannot be found
What can I do to fix this and be able to restore my files?
Thanks
Regards
Hi,
My Server backups stopped on 11 March.
I had my backups configured to be saved at an ISCSI drive I:
This drive is active and healthy:
The system has been working fine up until 11:
I can't perform any backups or restores.
When I try to browse for a restore it takes long time and I get this:
These are the source volumes:
I have recorded the backup settings and the result is the same.
This is what I get in the log:
Can anyone help solve this?
Thanks
Best Regards.
NC
Hi,
I have installed the Windows Server Backup feature several times in Windows Server 2012, but the "Windows Server Backup UI" is missing under the "Administrative Tools" and under the \System32\wbadmin.msc .
Any ideas how to re-create or workaround this problem ?
I really appreciate your help !
With kind regards,
Cengiz Kuskaya
whats is the best way for re-install my system -windows server 2012 r2.
in this moment I have a problem too, my system does not recognize my usb devices.
please help me.
Hi everyone,
I have an Exchange 2010 CAS and another Exchange 2010 Database that I want to migrate to a new Exchange server 2016 running Windows Server R2.
Can I use the Windows server 2012 R2 for both CAS and Database?
Please help
Thank you
Hi,
Is there any way to increase the time of Cluster Shared Volume VSS writer?
vssadmin list writers shows this writer is only State: [8] Failed Last error: Timed out
Event viewer application log:
Event ID: 8229
Source: VSS
A VSS writer has rejected an event with error 0x800423f2, The writer timedout expired between the Freeze and Thaw events.
Please note, it's a Windows Server 2012 R2 Datacenter system.
I'm really hoping someone can help out, as I'm going a bit crazy.
When I had set up the backup schedule for my WinServer 2016 domain controller in Windows Server 2016 Backup, I had it dedicate a virtual drive to backups.
The file for the virtual drive is called "Domain Controller Backup.vhdx" and is sitting on a backup drive mounted to G: on the host Windows system, FREDHOST (for purposes of this discussion).
Unfortunately, the vhd file for our domain controller got corrupt, so I'm trying to restore.
When I try to boot into the server, called DC1 (for purposes of this discussion), it cannot successfully boot and takes me to the troubleshooting options (as you would expect).
The problem is when I try to use System Image Recovery (in troubleshooting options), it just will not find any backups.
I have the backup virtual drive mounted to the virtual machine (via HyperV Manager) just as I did when it was successfully doing backups. However, it won't find any backups.
When I run mountvol in a command prompt, it shows multiple volumes, but none have a subdirectory called WindowsImageBackup.
I've tried making the virtual drive available via a network share (\\FREDHOST\G) and accessing via the network location option in System Image Recovery. It seems to see it, but then asks for ID and password. No matter what I enter (including a valid ID/PW for the host machine), it says its an invalid ID/PW. (Frankly I don't think this route is the answer, since I have a dedicated virtual backup drive.)
What do I need to do to get to my backups?!
Do I need to mount the dedicated backup drive a different way? Am I going to have to create a new 2016 Server and load from the Windows Server Backup interface?
I've seen a bunch of articles on the 'net, but none seem to address dedicated backup drives.
Thanks for your help.
In a command prompt when I enter mountvol, I see several volumes, but none of them have a subdirectory called WindowsImageBackup.
In a command prompt when I enter mountvol, I see several volumes, but none of them have a subdirectory called WindowsImageBackup.
In a command prompt when I enter mountvol, I see several volumes, but none of them have a subdirectory called WindowsImageBackup.
In a command prompt when I enter mountvol, I see several volumes, but none of them have a subdirectory called WindowsImageBackup.
In a command prompt when I enter mountvol, I see several volumes, but none of them have a subdirectory called WindowsImageBackup.
In a command prompt when I enter mountvol, I see several volumes, but none of them have a subdirectory called WindowsImageBackup.
Hi All
We have upgraded from server windows 2012 to windows server 2019 data center. New server, clean install and are using VM’s for the first time in Hyper-V and in the past we used the windows server backup (WSB) tool that is on the dashboard. Our VM’s are running DC AD with roaming profiles, file shares, DHCP, DNS, SQL etc.
I have been reading about it. There is Data Protection Manager (DPM) and WSB. We only have one server that runs all the VM’s.
Can we backup the host server using WBS and will it backup all the VM’s and file etc?
Or use DPM to backup the Host or backup the VM’s only?
What would be the best way/method to backup everything?
Thank you.